MP101403 latches in presence of south pole and unlatches in presence of north pole magnet
RoHS Compliant
Applications:
Door position sensing
Flow sensing
Pedal switch
Note: These sensors require the use of an external pull-up resistor, the value of which is dependent on the supply voltage. Pull-up resistor should be connected between output (Green) and Vcc ...
(2) Solid state, magnetic position sensors in adjustable, threaded housing.
Features
Excellent output stability over operating temperature range
Regulated power supply not required
Reverse battery protection to -24VDC
Meets IEC529 IP67 for dust and water protection
Wire: 20 AWG, tin plated, polyolefin insulation
Anodized aluminum housing
South pole activated
RoHS Compliant
Open Collector (NPN) output can be used with bipolar or cmos logic circuits with suitable pull up resistor -Output switches low (off) when the magnetic field at the sensor exceeds the operate point threshold -Output switches high (on) when the magnetic field is reduced to below the release point ...
(3) Hall-effect position sensor with convenient snap-fit mounting.
Features
Solid state reliability
Excellent output stability over operating temperature range
Regulated power supply not required
Meets IEC529 IP67 for dust and water protection
Open Collector (NPN) output can be used with bipolar switch or cmos logic circuits with suitable pull up resistor
MP101301 and MP101302-unipolar switch -Output switches low (off) when the magnetic field at the sensor exceeds the operate point threshold -Output switches high (on) when the magnetic field is reduced to below the release point threshold
MP101303 - bipolar latch -Output latches high (on) in the presence of a south pole -Output ...
(6) Digital Hall-effect position sensor in plastic flange-mount housing.
Features
Three sensing orientations available in a convenient flange mount housing
Excellent output stability over operating temperature range
Compatible with unregulated power supply
Reverse battery protection to -24VDC
Meets IEC529 IP67 for dust and water protection
Open Collector (NPN) output can be used with bipolar switch or cmos logic circuits with suitable pull up resistor
MP1012101- 03 - north pole activated unipolar switch -Output switches low (off) when the magnetic field at the sensor exceeds the operate point threshold -Output switches high (on) when the magnetic field is reduced to below the release point ...
